APN-Bullet-Shaped Design - Ball End Mill - 4 Flutes
Product Introduction
- Special bullet shape design, improve anti-chipping function, large bottom angle to reduce cutting resistance.
- For ditch and pro le process with bullet-shaped cutting groove. Easy to remove chips and the surface is more equal than general type.
- Selected carbide round bar from Europe high rigidity utes lead the e ect of lower tools chatter and processing noise.
- Coating: JLC exclusive coating (ball end mill static point is covered ) improve tool life time and surface accuracy of workpiece.
| Number | (R) | (D) | (H) | (T) | (d) | (L) | Number | (R) | (D) | (H) | (T) | (d) | (L) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| APN0204 | 1.0R | 2 | 4 | 4 | 4 | 50 | APNS0204 | 1.0R | 2 | 4 | 4 | 4 | 75 | |
| APN0304 | 1.5R | 3 | 6 | 4 | 4 | 50 | APNS0304 | 1.5R | 3 | 6 | 4 | 4 | 75 | |
| APN0404 | 2.0R | 4 | 8 | 4 | 4 | 50 | APNS0404 | 2.0R | 4 | 8 | 4 | 4 | 75 | |
| APN0606 | 3.0R | 6 | 12 | 4 | 6 | 50 | APNS0606 | 3.0R | 6 | 12 | 4 | 6 | 75/100 | |
| APN0808 | 4.0R | 8 | 16 | 4 | 8 | 60 | APNS0808 | 4.0R | 8 | 16 | 4 | 8 | 75/100 | |
| APN1010 | 5.0R | 10 | 20 | 4 | 10 | 75 | APNS1010 | 5.0R | 10 | 20 | 4 | 10 | 100 | |
| APN1212 | 6.0R | 12 | 24 | 4 | 12 | 75 | APNS1212 | 6.0R | 12 | 24 | 4 | 12 | 100 | |
| APN1616 | 8.0R | 16 | 32 | 4 | 16 | 100 | APNS1616 | 8.0R | 16 | 32 | 4 | 16 | 150 | |
| APN2020 | 10.0R | 20 | 40 | 4 | 20 | 100 | APNS2020 | 10.0R | 20 | 40 | 4 | 20 | 150 |